eclat "Cortex FC" 2019 Freecoaster
- Weight : 0.7kg / 1.54lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 15907
The eclat "Cortex FC" 2019 Freecoaster comes with a fresh new design and includes already tow hubguards for driver and non-driver side. This eclat "Cortex FC" 2019 Freecoaster comes with some updates like 3 point internals and stopper ring on bearing and was tested by eclat team riders. The driver is equipped with two sealed bearings and an additional polymer bushing and the clutch runs on a specially developed IOS-System by a into the clutch inserted spring and O-ring resistance mechanism accurately and without wear on the shaft. The gap of this eclat "Cortex FC" 2019 Freecoaster coincides with an almost 3/4 idle rotation deliberately very large but can be set individually by adding the supplied gap rings after removing the driver the axle and the non-drive side bearing.
Facts: eclat "Cortex FC" 2019 Freecoaster
- Material:
Shell: 6061-T6 aluminum, 36H
Axle: 14mm Male, CrMo, heat treated, hollow with 6mm allen key insert
Nuts: CrMo, 17mm wrench or nut
Cone: CrMo - Driver: LHD 9T
- Bearing: 2 x sealed bearings, 1 x polymer bushing
